|
|
|
|
With a Jet City Custom Eminence driver and a single input, the JCA12S is our straightforward tone box. Use it as the foundation of a 20 watt half stack with JCA20H or even in a full stack configuration. It’s also the same dimensions as our JCA2112RC so stack them up for increased speaker volume.
Tech Specs:
* Inputs: 1×16ohm
* Power handling: 70watts RMS
* Cabinetry: Multi-ply, void-free hardwood
* Drivers: 1×12” Jet City Custom Eminence Driver
* Dims: 20″Hx21″Wx11″D
* Weight: 26.6lbs net
Pure, simple, and full of tube tone, JCA20H delivers from a single-channel amp with absolutely no gimmick features to dilute the all-tube signal path. Elegance of design both inside and out deliver unflinching reliability in an amp good-looking enough to make a girlfriend jealous. With full EQ control and separate Preamp and Master volumes, JCA20H can deliver spanky cleans through crunchy overdrive.
Tech Specs:
* Controls: Preamp, Bass, Middle, Treble, Master, Presence
* Tubes: 3x 12AX7 Preamp / 2x EL84 Power
* Rectifier: Solid State
* Cabinetry: Multi-ply, void-free hardwood
* Chassis: 16 gauge, cold-rolled steel
* Output Power: 20 watts into 16 ohm or 2x 8 ohm speaker outputs
* Input Power: Multi-tapped power transformer at 100v/120v/220v/240v and standard IEC connector
* DIMS: 9″Hx9″Dx19.5″W
* Weight: 21.3lbs net
|
|
|
|
With two channels of Soldano tone and 100 watts of pure tube power, this is our flagship. The Normal channel has plenty of headroom to deliver clear, bright clean tones and can be driven hard enough to get downright raunchy. The Overdrive channel is the circuit that made Soldano famous. It’s been modeled and imitated, but this is the real-effing-high-gain-deal.
Tech Specs:
* Channels: Normal and Overdrive, foot-switchable with included footswitch
* Controls: Normal and Overdrive Preamps, Bass, Middle, Treble, Normal and Overdrive Masters, Presence
* Effects Loop: Tube buffered
* Footswitch: Overdrive channel footswitch, included.
* Tubes: 5x 12AX7 Preamp / 4x 6L6 Power
* Cabinetry: Multi-ply, void-free hardwood
* Chassis: 16 gauge, cold-rolled steel
* Output Power: 100 watts into 16 ohm or 2x 8 ohm speaker outputs
* Input Power: Multi-tapped power transformer at 100v/120v/220v/240v and standard IEC connector
* DIMS: 9.5″Hx9.5″Dx25″D
* Weight: 43.6lbs net
|
|
JCA2112RC is a “combo” of our JCA20H and JCA12S, with tube-driven reverb included. Easy-access speaker connectors on the rear panel allow JCA2112RC to drive external cabinets either with or without the internal Jet City Eminence Custom driver. Stacked on an additional JCA12S, the speaker volume doubles and the added height brings the controls to arm’s length in a small club.
Tech Specs:
* Controls: Preamp, Bass, Middle, Treble, Master, Presence
* Tubes: 3x 12AX7 Preamp / 2x 12AX7 Reverb / 2x EL84 Power
* Rectifier: Solid State
* Cabinetry: Multi-ply, void-free hardwood
* Chassis: 16 gauge, cold-rolled steel
* Output Power: 20 watts into 16 ohm or 2x 8 ohm speaker outputs
* Input Power: Multi-tapped power transformer at 100v/120v/220v/240v and standard IEC connector
* Power handling: 70watts RMS
* Drivers: 1×12” Jet City Custom Eminence Driver at 70watts RMS
* DIMS: 20″Hx21″Wx11″D
* 38.7lbs net
|
|
JCA48S
This is the same design as Soldano’s signature 4×12, and we’ve loaded it with Jet City Custom Eminence Drivers and added switchable mono / stereo operation. JCA20H sounds big and mean when it moves a lot of air through this cabinet, but pair it with JCA100H and really experience what a high-gain half stack can do.
Tech Specs:
* Inputs: 1×4ohm for mono in series or 1×16ohm in parallel operation, or 2x 8ohm for stereo operation
* Power handling: 280watts RMS mono or 140watts RMS per channel for stereo operation
* Cabinetry:
* Drivers: 4×12” Jet City Custom Eminence Drivers
* DIMS: 28″Hx28″Wx14″D
* 69.5lbs net
* Multi-ply, void-free hardwood
|
|
|
